Meanwhile Nutritional baby food processing machine particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Nutritional baby food processing machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Nutritional baby food processing machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Nutritional baby food processing machine

Baby food machine is used to produce infant baby food and some other instant flour products. The raw material is put in the mixer then mixed ingredients are feed into extruder feeder. The extruder is fitted with: special cylindrical holding silo; vibratory doser with hopper to feed the extruding screw; extrusion mechanism and cutting; independent electric panel.

After the extrusion the product is conveyed till the continuous rotary drier through a pneumatic conveyor. The continuous rotary drier has a heat ex-changer with gas burner that allows a better heating of the product and it is economically viable owing the low cost of electric power. Case the client prefers we have the electric drier also.

this line can product infant food, nutritional powder ,instant powder and so on

Nutritional baby food processing machine capacity

150kg/h(MT65 Extruder), 240-300kg/h(MT70 Extruder) , 500kg/h(MT85 Extruder), 600-900kg/h(MT95 Extruder)

Nutritional baby food processing machine flow

Mixing system---Extrusion system---- -Drying system----Milling system---Packing system

Three phases: 380V/50Hz, Single phase: 220V/50Hz,

we can make it according to customers' Local voltage according to different countries.

1. Able to handle a wide range of raw materials by simply varying the temperature, moisture and drying parameters.

2. The raw materials can be a wide range of flours and starches, pure or blended, such as rice, soy, corn, oat, millet, wheat, sorghum, banana, cassava and potato.

3. Various recipes are supplied, which can add vitamin, mineral and other nutritional substances to meet different nutritional requirements.

4. Compact equipment design.

5. Lower maintenance costs.

6. Minimal shear action during the extrusion process provides end products with high viscosity in cold water.

7. Turnkey project provided, from raw materials to packing procedures.

8. Fully stainless steel 201

Packaging & Shipping

Our Services

when our machinery arrived at your factory ,our engineer will going to your factory for installation and teach .

Company Information

we MT machinery&equipment CO.,LTD is a manufactory professional do the corn flakes machinery processing line ,we have good engineer ,have many years installation experience ,can help our customer do the good quality product .