oil drilling modified starch making machine

Meanwhile oil drilling modified starch making machine particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
oil drilling modified starch making machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
oil drilling modified starch making machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Starch food making machine

Description

Modified starch, also called starch derivatives, is prepared by physically or chemically treating and is used as food additives to change food properties. Modified starches are practically used in products as a thickening agent, gelatinizing agent, stabilizer or emulsifier, which could be treated as a replacement of expensive raw materials to reduce cost, enhance quality and improve economic returns in food field. As a broad-spectrum and important industrial raw material, modified starch is able to become paste only mixing with water, saving the process of heating. It is widely applied in building, medicine, food, cosmetics, fodder, oil drilling, metal casting, textile, paper making, etc.

Technological Process

Raw Materials Configuration→ Mixing→ Conveyance→ Extrusion→ Conveyance→ Drying→ Conveyance→ Pulverizing

Equipment Configurations

1. Flour Mixer: Evenly stir starch alone or starch mixture (e.g. corn starch, cassava starch, potato starch, etc) with a certain amount of water. Choose different GY flour mixer model according to different output requirements.

2. Spiral Conveyor: Convey stirred raw materials into feeding hopper of extruder.

3. Extruder: Select different GY extruder model based on clients’ raw materials and output capacity requirement. With the help of special control cabinet, extruder is able to extrude the raw material under different temperature & pressure, and produce puffed products. The shapes of products can be changed by changing the modules in extruder.

4. Air Conveyor: Convey material into drying oven.

5. Multi-layer Drying Oven: Dry semi-finished products. It is the most common dehydration plant for puffed food. It includes a belt dryer and some in-built heating devices to carry out drying by means of electricity, vapor, diesel or gas. The drying temperature and drying time can be controlled.

6. Pulverizer: Select an appropriate pulverizer according to the requirements of modified starch.

Characteristics

§ Various models to meet different output capacity requirements.

§ Flexible configurations to meet different produce, budget and workshop layout requirement.

§ Vast raw material range to produce different final products by only one production line.

§ High automation and accurate control system to save labor cost and improve the quality of final products.

§ Independent temperature control system is able to realize zone temperature control, electronic induction, accurate & visual digital display.

§ Feeding system without material returning. It is unnecessary to clean barrel and screw in case of restarting or material replacement.

§ Screw adopts high-performance nitride alloy steel with strong wear-resistance and oil drilling modified starch making machine service life.

§ Food-grade stainless steel. Neatness and easy clean.

Technical Parameters

Workers

Normally 1-2 operators are sufficient for production.

Samples

1. Manufacture:

1) Keep the quality the first.

2) Make more products benefit to customers' need.

________________________________________________________________________

2. Online/Sale service:

1) Supper and solid quality.

2) Fast and punctual delivery

3) Standard export package or as customers' need.

________________________________________________________________________

3. Pre-sale Service:
1). Related machine technical parameter will be supplied.

2). According to customer’s factory size, factory layout can be provided.

3). According to customer’s material cost, general formulation can be prepared.
4). Special machine can be supplied according to customer’s request.
5). Professional advice about market, machines, processing, materials, packing can be supplied
6). Suggesting professional ship agent or helping book ship as customer request.

________________________________________________________________________

4. After-sale service:

1)Allocation chart as the buyer’s request will be supplied.

2) Reasonable equipment place scheme is available according to client plant’s size.

3)Provide all basic formulas; various types are optional.
4) Operation manual will be supplied after shipment.
5) One year warranty, lifetime maintenance.
6) Free quick-wear parts will be sent.
7) Local installation service is available (free restricted to Chinese market).

8)Free training.

________________________________________________________________________

5. Other cooperate service:

1) Technology knowledge share.

2) Factory building advising.

3) Business expansion advising.

Company Introduction:

Jinan oil drilling modified starch making machine Machinery & Equipment Co., Ltd.(GY Machinery)is the professional manufacturer for advanced and high efficient extrusion food machinery.

GY has an expert team with around 15 years experiences in this extrusion machine industry. We constantly research extrusion technology and explore food process in order to benefit our clients producing better and creative food.

After years of research, GY has more than twenty production lines with different functions and capacities to meet different customer requirements:

1.Direct Puff oil drilling modified starch making machine Process Line

2.Breakfast Cereal & Corn Flakes Process Line

3.Core-Filling oil drilling modified starch making machine Process Line

4.Pellet oil drilling modified starch making machine Process Line

5.3D Pellet oil drilling modified starch making machine Process Line

Pani Puri/ Golgappa Puri/ Golgappa fryum/ fryum

6.Cheetos/Kurkure/ (Nik) Naks/Corn Curls Process Line

7.Triangle Chips/ Doritos/Tortilla Chips Process Line

8.Fried Wheat Flour Snacks/Salad/ Crispy Chips/Bugles/Rice Crust Process Line

9.Pasta Process Line

10.Nutritional / Artificial Rice Process Line

11.Nutritional Powder/Baby Food Process Line

Modified Starch Process Line

12.Bread Crumb Process Line

13.TVP/TSP/Soya Protein Process Line

14.pet food Process Line

15.Mini Burger Patty/Nuggets/Fillet/Steak Process Line

16.Mini Instant Noodle Process Line

17.Instant oil drilling modified starch making machine Production

18.Mini Biscuit Process Line