processing line floating fish feed machinery

Meanwhile high quality processing line floating fish feed machinery particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
high quality processing line floating fish feed machinery Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
high quality processing line floating fish feed machinery Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Products Description

Professional production, quality assurance, affordable, welcome to inquire,
100% factory direct sales, look forward to building cooperate with you wholeheartedly!

Product Application
High quality processing line floating fish feed machinery is widely used for producing variety materials into high-grade aquatic feed pellets for fish, catfish, shrimps, crab etc. The final products have unique shape and good taste, high nutrition and smooth textures. For feeds of fish and shrimp, the floating time in water can be adjusted by the extrusion degree adjustment. This dry type floating fish feed machine is an ideal for small and medium fish farm holders or feed processing plant.
Production process
Mixer → Screw conveyor → Extruder → Conveyor → Oven → Cooling → Packaging

Model	Installed power	Real power	Output	Dimension
ZH65	35kw	22kw	150kg/h	39000x1200x2200mm
ZH70	50kw	37kw	250kg/h	41000x1500x2200mm
ZH85	110kw	75kw	500kg/h	43000x3500x4300mm
ZH90	151kw	110kw	1ton/h	4700x1900x4800mm
ZH135	425kw	335kw	3ton/h	5200*2000*4800mm
ZH**	**kw	**kw	**ton/h	*******

Technical Features of high quality processing line floating fish feed machinery

1. This extruder equipment adopts the auto-controlling speed feeding tool to produce the feed material evenly.
2. Electric heating device is adopted which can improve the feed expansion rate and pellets floating time.
3. High temperature and high pressure cooking process can kill the salmonellosis and bacterial infections and also makes the pellets easily to digest.
4. The cutting knife adopts the frequency controlling speed in order to change the material size.
5. The floating time can be controlled by the puffing degree adjustment.
6. Auto-temperature control system makes the temperature controlling more direct viewing and the parameter more precise.

Twin-Screw Extruders

In order to create a design with greater operating flexibility and with greater operational control, twinscrew machines were developed. Twin-screw extruders can be co-rotating, counter-rotating, intermeshing or non-intermeshing in terms of basic designs. Co-rotating, intermeshing screw designs have dominated that scene as far as these extruders are concerned. This is because of relative ease of design and manufacture compared to counter-rotating designs.The screw design of twin-screw extruders can

affect operating efficiency and machine capability. Screw components in the feed section of the barrel can be single, double or even triple flight arrangements. With more flights intertwined on the shaft, the conveying capacity of the screw is reduced but the residence time distribution is lower. This promotes a first-in, first-out movement of the extrudate. However, double- and triple flighted screws produce more shear across the screw channel and therefore, improved processing uniformity.

Advantages of Floating fish feed Machine

1) This fish food extruder is widely used for producing floating feed pellets of all kinds of aquatic animal.
2) Advanced technology and humanized design ensures easy operation and reliable performance.
3) High efficiency, low power consumption
4) Screw sleeve of this small fish food extruder adopts enchase alloy steel strip structure, which guarantees long service life.
5) Different moulds can be chosen to make pellets with different diameters and shapes.
6)Feed pellets dia. Is 0.8-20mm.
7) Capacity:0.1-10T/H

Our Company

Assembly Workshop

Our Workshop

Showing Workshop

Show finished machines

Office

Our office

Team

Our Team

Meeting Room

Meeting with customers.

Sample Room

Showing products produced by our machine.Certifications FAQ

Q1. Are you a manufacturer or a trading company?

A: We are a professional manufacturer of food & feed extrusion machine.

We have own factory and R&D department. SGS has certified our company on site.

Q2. What is your payment terms?

A: Strongly recommend to use high quality processing line floating fish feed machinery’s Trade Assurance.

T/T :30% prepayment,70% before delivery. L/C at sight is available.

Other payment is negotiable

Q3.Do you offer guarantee for the products?

A: Yes, we offer 1-2 years warranty to our products.

Q4. What about the lead time?

A: Regular products:20-30 working days

Customizable products:30-40 working days.

Q5. Can you provide food or feed formula ?

A: We can provide basic formula for produce the food etc.

And help customer to produce new products according to customer’s formula.

Q6. What after-services do you provide?

A: Send engineers for installation, trial running and training workers at customer's site.

Handling the problems occurred during use. Supply spare and wearing parts on discount.
Help customers to solve any other problems .
Packing & Delivery

Packing: Outer Packing---Wooden case

Inner Packing----Wrapped with plastic film.

Delivery : 20-40 working days

1. Fixing the machine2.Wrapping machine with Plastic film3. Wooden case Packing 4. Painting Logo5. Loading6. Ready for Shipping Our service

1. We will give detailed introduction of the fish feed making line according to the client capacity requirement.
2. Share any information about the fish feed making line that the clients need, like detaield pictures, video,etc
3. Design fish feed making line for client according to different requirements.
4. Help the clients to do suitable formulation.
5. Give detailed instruction manual and video to help the client operation the fish feed making line.
6. We could send engineers to clients' local places for installation, debugging, and taining.

Welcome to our factory, if you are interested in our products.

We could supply you with high quality machines and good after-sales service.