new design new condition dry pet chews food making machine

Meanwhile new design new condition dry pet chews food making machine particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
new design new condition dry pet chews food making machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
new design new condition dry pet chews food making machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Product Description

1.Introduce:

new design new condition dry pet chews food making machine,is basic on the tech from Germany,JINAN new design new condition dry pet chews food making machine COMPANY develop it and seperating into three types on produce thi pet chews products:extruding ,pressing and casting.We will modify our machinery types according to differents customers need exactly.

Model	Installed power	Power(KW)	Output	Size(M)
DLG100-I	76	53	80-120kg/h	19×2×2
DLG100-II	113	79	80-120kg/h	19×3.5×2
RNP-100TA	5.5	5.5	80-120kg/h	1.8×0.9×2.3
RNW-260	22	22	200-300kg/h	6.1×1.4×2.2

2.Materials:adopts corn flour, bone meal, fish meal as raw materials

3.Processing Line:

new design new condition dry pet chews food making machine

mixer—screw conveyor—single screw extruder—cooling conveyor—cutter—hoister—oven

4.Voltage:

Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers' Local voltage according to different countries

5.Quick Details：

new design new condition dry pet chews food making machine
Condition: New
Place of Origin: Shandong, China (Mainland)
Brand Name: new design new condition dry pet chews food making machine
Model Number: SLG65
Application: pet food/Fish food/Bird food/dog food
Power(W): 50-70kw
Dimension(L*W*H): 12000-26000*1200*2200mm
Certification: CE/ISO9001
After-sales Service Provided: Engineers available to service machinery overseas
Packaging & Delivery
Packaging Details: Suitable for export wooden box
Delivery Detail: About 35 days after receiving the down payment

6.China standard industrial Voltage：
Three phases: 380V/50Hz, Single phase: 220V/50Hz, We can make it according to customers’ Local voltage according to different countries (400v 415v 480v

Products Show

The pet food extruder machinery Flow chart:

mixer—extruder—air conveyer—3 layers oven—oil sprayer—cook machine(pack machine)

About mixter

About the machine
Our company have different this machine.Different output.You can choose according to your requirements of different hybrid production machine
Main motor 3 kw / 4 kw / 7.5 kw
1 surface touch the mixer and the raw material of stainless steel;Mixer is easy to operate.
2 drain hole adopts the design of new handle - the opened, sealed, avoid leakage of material

About Double screw Extruder

1. Extruder is mainly composed of feeding, pre-conditioning, extrusion and cutting systems.
2. Main engine adopts inverter to adjust speed of screw according to changing of formula.
3. adopt building block system (BBS) to be adjustable for different technology.
4. Double-shaft pre-conditioner makes excellent result of mixing and conditioning, increasing capacity of extruder 10-15%.
5. Diameter of feed 1mm to 12mm can satisfy feed production for dog, cat, tortoise, bird, sea fish, shrimp and pet fish etc.
6.Self-cleaning, when stopping, it can be cleaned without disassembling.

Drying system

Our company have different kinds of oven.such as 3layer.5layer.7layer.and so on this oven suitable for different production.
The Heat Type:Electrucity.Gas,
Functions:
It can be used to bake and dry the food. The oven can bake all kinds of the inflating food,
pet food, TVP/TSP food, peanut, nut, chew nut and so on.

Flavoring system

Our drum includer Octagonal drum.sigle drum.double drum,u
1.The inside turning container is very sanitary because of adopting the stainless steel material. The small roller is used for the small output whereas the big roller is used for the plentiful output.
2.we can spray the oil and sprinkle flavoring material in this roller, we can flavoring products automatically. this roller is easy to operate it. and easy to clean it after day work.

Details of the image

COMPARE BETWEEN new design new condition dry pet chews food making machine EXTRUSION AND COMMON EXTRUSION PRODUCTS:

simple picture

Packing & Delivery

Packaging
Size	1230 (L) * 456 (W) * 789 (D)
Weight	1.2 T
Packaging Details	The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Packaging
Size	123 (L) * 456 (W) * 1189 (D)
Weight	2.2 T
Packaging Details	The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Certifications Our Service

Before sale services
1.Provide the free consultation of the equipment.
2.Provide the standard device and the flow chart.
3. According to the clients’ special requirement, offering the reasonable plan and free design helping to select the equipment.
Services during the sales
1.Help client design the factory and offering professional advice, free engineering drawing for the factory layout.
2.Welcome to visit our factory or the domestic clients’ factory.
3.Inspect the machine before leaving the factory.
After sale services
1.Oversea install and debug the equipment.
2.Train the first-line operator.
3.Provide the basic formula.

FAQ

1. What's the materils:
Answer: Stainless steel

2. How long is your gurantee time?
Answer: One year after comissioning.

3.How is the installation?
Answer: When the machine arrives at the your workshop, we send 1-2 engineers to install the machine and teach the workers how to use. There be a operate mannual and Equipment maintenance manual.

4.I want to do many shapes and many tastes. It is ok?
Answer: The shapes depends on the dies, we can design the dies according to your special request. And we will supply a basic formula. You can adjust and find the best formula to meet your target market's taste.

5.How is the payment?
Answer: 40% TT as downpayment, 60% TT or L/C before shippment. Before shippment,welcome to inspect the machine.

our other product

No.	Production Line
1	Extruded Kurkure / Nik Nak Snacks Food Production Line
2	Core Filling / Inflating Snacks Production Line
3	Breakfast Cereals / Corn Flakes Production Line
4	Extruded Doritos / Tortilla Corn Chips Snacks Food Production Line
5	Crispy Chips / Sala / Bugles Production Line
6	nutrition powder / Baby Rice Powder Production Line
7	Nutrition Rice / Artificial Rice Production Line
8	Bread Crumbs Production Line
9	Extruded Soya Meat Food Production Line
10	Extruded Pet / Dog / Cat Food Production Line
11	Sinking/ Floating fish feed production line
12	Extruded Snacks Pellet Food Production Line
13	Pasta/ Macaroni/Spaghetti production line
14	Fried Wheat Flour Snacks Production Line
15	INSTANT NOODLE PROCESSING LINE
16	PET CHEWS FOOD PRODUCTION LINE

Related Products