new functional new agricultural machines rb-35

Meanwhile new functional new agricultural machines rb-35 particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
new functional new agricultural machines rb-35 Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
new functional new agricultural machines rb-35 Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

new functional new agricultural machines rb-35

company website:http://en.shh28.com/

new agricultural machines Product pictures

Made from guangdong shenghui factory, sell and supply, good quality and best price. Shenghui machinery is one of the biggest food manufacture factory of china.

new agricultural machines Parameters:

Type	RB-35
material	Stainless steel
weight	85KG
Power	0.55KW
Voltage	380V
Specification	860*600*1400MM
Packing	By standard export wooden case
Delivery Time	Within 7 days after receiving payment
Port of loading	Guangzhou/Shenzhen port
Guarantee	One year (for non-human factor malfunction)
MOQ	One set

This machine is made of stainless steel, it can meet the health standards of food safety.

new agricultural machines Description

1.Large Scale full automatic forming machine can automatically complete the step of the meat filling, forming and output, etc. 2.Different shapes of products can be achieved by replacing the different molds, anti-friction, and durable, apply to food hygienic standard.

3.Suit for making Burger patties, chicken pie, fish cakes, potato pie, pumpkin pie. Easy-to-use operation, convenient cleaning, stable performance, safe and reliable. Appropriate for meat processing factory, cartering industrtm and food distribution center.

new agricultural machines

Name: Full Automatically Meat Pie Forming Production Line
Type: RB-35X
Full Automatically Meat Pie Forming Machine can finish meat pie forming automatically, including the stept of starching, Powdering,bread crumbs. This machine is adopted high quality stainless steel, anti-friction and durable, apply to food hygiene standard. Sutiutable for burger patties, chicken pie, fish cakes, potato pie, pumpkin pie and so on.
High automatal degree, simple operation, easy to clean, stable performance, safe and reliable, suitable for meat processing plants, catering industries, food distribution centers

Details

FAQ

1. What's best way of cleaning and maintenance for cutting?

Answer: Because this series of machine is processing machine that exist oil, can use boiling water clean cutter , you can also add detergent properly to clean it.

Cutters maintenance: After cleaning the cutter, you should oil edible oil after drying it, which can make it lubricating and antioxidant.

2. What's the maintenance about machines?

Answer: Maintenance method: Machine should add lubricating oil aiming at chain, gear and bearing every half year, reduction gearbox should be added engine oil. If the machine was used frequently, we suggest that you can maintain it once every quarter. If the machine along with belt, conveyer belt, spring, you should check them whether loose every quarter, adjust or change them in time when were found loosely.

3.What can we do if the cutter is blunt or oxidized with yellow?

Answer:Cutter is blunt, you need to use the emery cutter or the abrasive stick to polish it.If the cutter is oxidized with yellow, use YiJieling or other scouring liquids to polish it ,and use edible oil for protection after cleaning.

4.How mang hours can the machine work continuously?

Answer:Machine can work 24hours continuously in general condition. But suggest open it after 4-5hours you should hold on, which provide certain protection for machine.

5.How to purchase meat cutting machine, why price difference exist so big?

Answer:Meat cutting machine can cut fresh meat, cooked meat ,frozen meet and bone .You should according to properties of meat and their output when buying machine. For some high price, equip with Magnetic control protection witch, cutter is convenient for cleaning, perfect cutting, excellent materials for blade etc.

6.Can the outing-mold of patty machine and ball forming machine order ?

Answer:Equip with appointed specifications for original configuration, Order other size mold within match size ,required to be add fare of mold , ball forming mold is ordered no more than 28MM

7.What's the characteristics of four thawed machine?

Answer: Recirculating Water Thawing Machine adopt the high pressure flowing water to thaw the material. Spraying Thawing Machine thaw material according to water circulation system and powerful spraying system. Water-cooling Pneumatic Thawing Machine through heating exchange of flowing water, Compression hot air and heating strip. Wind-Cooled Thaw Machine internally installed air-heater, achieving thawing effect through air flowing.

Why choose us:

1. 10734 m*m factory area, 12 years experience

2. Warranty date :one year, MOQ: one piece

3. ISO, CE & FDA certificated
4. Fast delivery and good service
5. All of our products have been strictly inspected before shipment.
6. Customers first, satisfying customers forever

Transactions notes

Trade description:

We provide EXW of product in first quote in most cases, not containing shipping freight and taxes.

After-sales description:

1.Warranty of all product is one year, while consumable items, such as blades, knife tackles, motors and so on are beyond guarantee range

2.We own professional engineering department and maintenance department, providing perfect after-service for customers.

3.We're always in your service to deal with any problem occurs on machine you purchased from us.

4.Any product sold from our company is attached with a warranty card and a product instruction.

Logistics description:

Products delivered from our factory are required to be packed in standard wooden cases or cartons.

Maintenance:

1.After cleaning the cutters and accessories touching food, don't forget to dry liquid on surface before you re-assemble them on machine.

2.Lubricate the axis of cutter with edible oil. Dismantle the blunt cutter and polishing it by abrasive stick.

3.Add oil into the reducing gear-box every half a year; lubricate bearings, chains, gears inside machine with oil every quarter.

Attentions:

1.Place machine on the flat ground; trundles of wheeled machine should be locked if there is need to move it.

2.Make sure the feeding mouth equipped on machine should not be blocked by foreign objects,

3.Connect the ground wire and suitable power box based on required voltage described on the labels.

4.Keep hands away from the feeding mouth and outlet of machine when it is operating.

5.Cut power first to stop running machine before dismantling and cleaning the parts.

6.Be careful when dismantling and cleaning the cutter and other sharp part

7.Circuitry part is forbidden to clean.

Trading Flow

Packing

Transportation

Payment and business card

About company

Production processes

Successful case

Welcome to visit our factory at any time!!

...

new functional olfa cutters,Quality guarantee,chinese guangdong factory manufacture.

....