fish food fish feed floating ingredients chewing pet food machinery/pet snacks processing line

Meanwhile fish food fish feed floating ingredients chewing pet food machinery/pet snacks processing line particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
fish food fish feed floating ingredients chewing pet food machinery/pet snacks processing line Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
fish food fish feed floating ingredients chewing pet food machinery/pet snacks processing line Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

- fish food fish feed floating ingredients chewing pet food machinery/pet snacks processing line

Working principle of chewing pet food machinery/pet snacks processing line

Feed at environment of high temperature (110-200 °C) and high pressure (25 to lOOkg/cm2) and high shear force, high moisture (10% 20% or even 30%), through continuous mixing, conditioning, heating, pressure, curing, extrusion die and sudden depressurization formed a bulk porous feed.

Useage of chewing pet food machinery/pet snacks processing line

It can be applied to different extruding processing, especially to the extruding soybean, poultry feed.

Main features of chewing pet food machinery/pet snacks processing line

1.The cutting structure is very advanced. The final length can be choosed. The feeder,cutter and main shaft are all controlled with inverter to ensure smooth running.

2.Novel design, unique, simple structure, easy to install and easy to unload .friendly to operate.

3.The Screw is made of special wear-resisting No38 chromium-aluminum-molybdenum. Wear parts are made of special anti-wear alloy with long service life.

4.In order to insure the quality and the capacity, there is the special pressure-increased device. And the Electric heating device improve the feed expansion rate.

5.The main bearing is from Japanese and Sweden SKF bearing. The main motor is Y-Series three phrase motor.

6.The floating pellets will float on the water for about 12 hours. It is very catering for fish. The pellets no polution and easy for working members to observe. It is mainly used to produce aqua feed, pet food, textured protein and other special feed.

The raw materials is experienced by the high temperature and high pressure,so it can kill the salmonellosis and bacterial infections.

The technical parameter of Wet-type Extruder, chewing pet food machinery/pet snacks processing line

1.The stainless stell frequency conversion feeder with speed-governing and arch-breaking prevents arching of materiala effectively in the bin and feeda more accurately.

2.With lengthening and forceful stainless steel conditioner.

3.The combined main shaft can be applied to different extruding processing, especially to the extrusion of soybean, corn, poultry feed and widely used in rice bran preservation and detoxification of cottonseed dreg and castor dreg etc.

The technical parameter of Dry-type Extruder, chewing pet food machinery/pet snacks processing line

1.Simple structure and factilities, convenient operation and maintenance. I t can process the kernels of corn and soybean.

2.Especially suitable for the extrusion of corn, non-protein nitrgen for ruminant, feather meal, meat and bone meal.

the photo of PHA model (wet type and dry type) chewing pet food machinery/pet snacks processing line

the photo of DSP model WET TYPE, chewing pet food machinery/pet snacks processing line

the photo of DGP model DRY TYPE, chewing pet food machinery/pet snacks processing line

The shipment of chewing pet food machinery/pet snacks processing line

Our company information:

----Henan Hengmu Machinery Co.,Ltd is specialized in feed machinery and complete engineering, enzyme production machinery and complete engineering, sawdust, rice husk and biomass particles equipment. We are making great efforts to offer high quality feed machines, biomass energy pelleting machines and organic fertilizer machines. We can make coal and biomass into energy. We have p[roduced and marketed feed processing machinery over ten years, have passed CE SGS TUV ISO9001 Certifictions.

Our Certification of chewing pet food machinery/pet snacks processing line

Equipment warranty of chewing pet food machinery/pet snacks processing line

1. Mechanical parts' warranty is one year , except wearing parts.

2. Three years' warranty for main components, including: automatic batching control system, the quantitative packaging scale system. If there are equipment malfunction, we guarantee we will offer timely guidance until the normal production after receiving user's telephone. Within one year, all the motor and reducer of each equipment can be returened, replaced and repaired.

3. After the expiry of the quality assurance, we will offer maintain services for 3 years. During the warranty period, we offer free maintenance guidance. After 3 years, we offer lifelong maintenance of the equipment. The user should be responsible for a normal maintenance costs.

4. Our company provide users with information about equipment technology and commodity information for lifelong.

5.When the user proceed equipment update, fish food fish feed floating ingredients chewing pet food machinery/pet snacks processing linevation, purchase. We can provide technical support for free.

6.Free of charge training. The training contract will be confirmed by the user.

If you are interested in purchasing Feed Machine, chewing pet food machinery/pet snacks processing line

(Crushing Machine, Mixing Machine, Feed Pellet Machine, Feed

Pellet Production Line, Wood Pellet Machine, Wood Pellet Production Line, Biomass

Energy Production Line, Extruding Machine, Cooling Machine, Drying Machine... )

If you have any question, please contact me.