shenghui factory special offer meat shawarma SH-125S

Meanwhile shenghui factory special offer meat shawarma SH-125S particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
shenghui factory special offer meat shawarma SH-125S Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
shenghui factory special offer meat shawarma SH-125S Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

company website:http://en.shh28.com/

shenghui factory special offer meat shawarma SH-125S

meat shawarma Product pictures:

This machine is made of stainless steel, it can meet the health standards of food safety.

meat shawarma Description:

1.Tailor-made cutter is adopted to the cooked meat cutting machine.

2.The barbecued pork, spiced pork, spiced beef, bath chap, pork tripe, beef tripe, brine bowel and meat like this can be cut into slices and strips by use of this cutting machine.

3.The length and the thickness can be adjustive by changing the speed of conveyer belt.

4.With high output, easy-to-use handling and convenient cleaning, the cooked meat cutting machine is suitable for food processing factory, catering industry and canteen.

Details

Made from guangdong shenghui factory, sell and supply, good quality and best price. Shenghui machinery is one of the biggest food manufacture factory of china.

FAQ:

1. What is best method of cleaning and maintenance the tool ?

Answer: Wash with water, can also be appropriate to join detergent to clean it. Tool maintenance: after each tool is cleaned, it should to dry. And then you should coated it with cooking oil to keep the cutting tool lubrication and anti-oxidation.

2. What is the machine maintenance?

Answer:Maintenance methods: machine should be added lubricant on the chain, the gear, bearing every six months, reduction gearbox should add oil.If the machine frequently used, it is recommended that each quarter will be maintenance once a year. If the machine with a belt, conveyor belt, spring, every quarter to check whether is flabby, found relaxation timely adjustment or replacement.

3. If the cutter is blunt, or oxidation with a yellow, how to do?

Answer:If the cutter is blunt, you can grind the knife with grinding wheel or oilstone. If the cutter is oxidation with a yellow, you can use the scouring liquid to scrub, after washing you should add some cooking oil to protect the cutter.

4.How many hours a day the machine can continuously work?

Answer:Generally a machine can 24 hours of uninterrupted work. But we suggest that the machine should stop for a while after work 4-5hours. It has a certain protection on the machine.

5. How to choose and buy vegetable cutter, why the price has a big difference?

Answer: The vegetable cutter can be divided into melon cutting, vegetables cutting and fruitcutting. You can choose according to the material properties and yield. Some vegetable cutter price is high, there are magnetic control protection switch,.The cutting tool is easy to unpick and wash, the cutting effect is good, the blade material is good.

6. what are the advantages of ozone machine of vegetables cutter?

Answer:Ozone is known as a broad-spectrum, efficient, fast, safe, no secondary pollution of the gas sterilization. It can kill bacteria spores, viruses, fungi and can be damaged botulinum toxin. It can exterminate the escherichia coli, staphylococcus aureus, salmonella, aspergillus flavus,fusarium, penicillium, black variant of bacillus, natural bacteria, neisseria gonorrhoeae and so on which attached to the fruits, vegetables, meat and other food . It also can kill the infectious virus, such as hepatitis B and also can remove the pesticide residue in fruits and vegetables and washing product residue toxicity.

7Why choose shenghui's melon cleaning peeling machine?

Answer:( 1).Structure: Is open design, easy to clean up with slag filter or slag boxes(2) The motor and reducer is separation design, to reduce the machine resonance, prolong service life and reducing gear wear and tear.(3)The both sides of the bearing is design by fully sealed , put an end to waste into the machine.(4) The material of brush is chosen high toughness bristles to reduce material loss(5)Circuit additional add to a overload protection device.(6)Lateral bearing retainer plate is thickening stainless steel plate, reducing machine vibration.(7)A discharging plate type is binding design, convenient

Why choose us:
1. 10734 m*m factory area, 12 years experience

2. Warranty date :one year, MOQ: one piece

3. ISO, CE & FDA certificated
4. Fast delivery and good service
5. All of our products have been strictly inspected before shipment.
6. Customers first, satisfying customers forever.

Transactions notes

Trade description:

We provide EXW of product in first quote in most cases, not containing shipping freight and taxes.

After-sales description:

1.Warranty of all product is one year, while consumable items, such as blades, knife tackles, motors and so on are beyond guarantee range

2.We own professional engineering department and maintenance department, providing perfect after-service for customers.

3.We're always in your service to deal with any problem occurs on machine you purchased from us.

4.Any product sold from our company is attached with a warranty card and a product instruction.

Logistics description:

Products delivered from our factory are required to be packed in standard wooden cases or cartons.

Maintenance:

1.After cleaning the cutters and accessories touching food, don't forget to dry liquid on surface before you re-assemble them on machine.

2.Lubricate the axis of cutter with edible oil. Dismantle the blunt cutter and polishing it by abrasive stick.

3.Add oil into the reducing gear-box every half a year; lubricate bearings, chains, gears inside machine with oil every quarter.

Attentions:

1.Place machine on the flat ground; trundles of wheeled machine should be locked if there is need to move it.

2.Make sure the feeding mouth equipped on machine should not be blocked by foreign objects,

3.Connect the ground wire and suitable power box based on required voltage described on the labels.

4.Keep hands away from the feeding mouth and outlet of machine when it is operating.

5.Cut power first to stop running machine before dismantling and cleaning the parts.

6.Be careful when dismantling and cleaning the cutter and other sharp part

7.Circuitry part is forbidden to clean.

Trading Flow

Packing:

Transportation

Payment and business card

About company

Production processes:

Successful case:

Welcome to visit our factory at any time!!

This machine is produced and sold by shenghui factory, with high quality and best price.

....

very popular meat slicing machinery,shenghui manufacture,good service,easy to wash.