Nutritional Protein Artificial Rice Production Line

Meanwhile Nutritional Protein Artificial Rice Production Line particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Nutritional Protein Artificial Rice Production Line Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Nutritional Protein Artificial Rice Production Line Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Puffed Nutritional Protein Artificial Rice Production Line

Introduction (application)

Based on modern nutritional requirement and integrated with advanced technologies, GY nutrition rice and artificial rice production line is researched and developed by our company to meet the requirements of the tendency that people have a more rational thinking about food nutrition. It has the advantages of high automaticity and wonderful energy conservation. This line could use rice, millet, black rice, buckwheat, etc as raw materials to generate new enhanced nutrition rice through extrusion, curing and forming after mixing with different types of vitamins, proteins and mineral substances, subject to a nutrient-rich & green-health rice and undifferentiated in cooking method.

Technological Process:

Raw Material Configurations→ Mixing→ Conveyance→ Extrusion→ Vibrating Screening→ Conveyance→ Drying→ Cooling

Equipment Configurations:

1. Flour Mixer: Stir mixed raw materials evenly with a certain amount of water. Choose different GY flour mixer model according to different output requirements.

2. Spiral Conveyor: Convey stirred raw materials into feeding hopper of extruder.

3. Extrusion: Select different GY extruder model based on clients’ raw materials and output capacity requirement. With the help of special control cabinet, extruder is able to extrude the raw material under different temperature & pressure, and produce puffed products. The shapes of products can be changed by changing the modules in extruder.

4. Vibrating Screening: Vibrating screening the semi-products to prevent adhesion.

5. Air Conveyor: Convey semi-finished products into dryer.

6. Multi-layer Drying oven: Dry semi-finished products. It is the most common dehydration plant for puffed food. It includes a belt dryer and some in-built heating devices to carry out drying by means of electricity, vapor, diesel or gas.

7. Cooling Machine: Realize fast cooling of dry coherent rice.

Characteristics:

§ Various models to meet different output capacity requirements.

§ Flexible configurations to meet different produce, budget and workshop layout requirement.

§ Vast raw material range to produce different final products by only one production line.

§ High automation and accurate control system to save labor cost and improve the quality of final products.

§ Independent temperature control system is able to realize zone temperature control, electronic induction, accurate & visual digital display.

§ Feeding system without material returning. It is unnecessary to clean barrel and screw in case of restarting or material replacement.

§ Screw adopts high-performance nitride alloy steel with strong wear-resistance and Nutritional Protein Artificial Rice Production Line service life.

§ Food-grade stainless steel. Neatness and easy clean.

Technical Parameters:

Workers:

Normally 1-2 operators are sufficient for production.

Samples:

Company Introduction:

Jinan Nutritional Protein Artificial Rice Production Line Machinery & Equipment Co., Ltd.(GY Machinery)is the professional manufacturer for advanced and high efficient extrusion food machinery.

GY has an expert team with around 15 years experiences in this extrusion machine industry. We constantly research extrusion technology and explore food process in order to benefit our clients producing better and creative food.

After years of research, GY has more than twenty production lines with different functions and capacities to meet different customer requirements:

1.Direct Puff Nutritional Protein Artificial Rice Production Line Process Line

2.Breakfast Cereal & Corn Flakes Process Line

3.Core-Filling Nutritional Protein Artificial Rice Production Line Process Line

4.Pellet Nutritional Protein Artificial Rice Production Line Process Line

5.3D Pellet Nutritional Protein Artificial Rice Production Line Process Line

Pani Puri/ Golgappa Puri/ Golgappa fryum/ fryum

6.Cheetos/Kurkure/ (Nik) Naks/Corn Curls Process Line

7.Triangle Chips/ Doritos/Tortilla Chips Process Line

8.Fried Wheat Flour Snacks/Salad/ Crispy Chips/Bugles/Rice Crust Process Line

9.Pasta Process Line

10.Nutritional / Artificial Rice Process Line

11.Nutritional Powder/Baby Food Process Line

Modified Starch Process Line

12.Bread Crumb Process Line

13.TVP/TSP/Soya Protein Process Line

14.pet food Process Line

15.Mini Burger Patty/Nuggets/Fillet/Steak Process Line

16.Mini Instant Noodle Process Line

17.Instant Nutritional Protein Artificial Rice Production Line Production

18.Mini Biscuit Process Line

Q1.Are you a manufacturer or a trading company ?

A:

We are a professional manufacturer of food making machine line.

Q2.Where is your factory located ? How can I visit there ?

A:

Our factory is located in Jinan City, Shandong Province, about 2.5 hour train from Beijing.

Q3.What’s the price of your food making machine line?

A:

Please contact us from the right side by Nutritional Protein Artificial Rice Production Line, we will reply you as soon as possible.

Q4.How to support me if i don't know how to use it?
A:

Free training within the warranty by tel and mail or skype. We also can dispatch our
technician to customer’s company to provide training and support if customer agree
the air ticket and hotel.

Q5.What's the pre-sale service of your company?

A:

Related machines’s technical parameter will be supplied to customer.

1. According to customer’s factory size, factory layout can be provided in advance.

2. According to customer’s material cost, general formulation can be prepared well.

3. Special machine can be supplied as customer’s request.

4. Professional Advice about Market, machines, processing , materials, packing can be supplied.

5. Suggesting professional ship agent or helping book ship as customer request.

Q6. What's the after-sale service of your company?

A:

1. Allocation chart as the buyer’s request will be supplied.

2. Operation manual will be supplied after shipment.

3. One year warrantee, life time maintenance with cost price.

4. Free easy broken spare parts will be sent with container .

5. First installation can be done by engineer.

6. Training workers in customer’s factory.

Q7. If machines wearing parts need changing, what should we do?

A:

We can offer the wearing parts all the time, and offer video.

Q8. What's the payment terms if we want to buy the machines?

A:

L/C, 100%T/T,T/T 30% down payment, 70% balance before delivery.

Q9.How transport?

A:

By sea