Nutrition rice powder baby food extruder processing line

Meanwhile Nutrition rice powder baby food extruder processing line particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Nutrition rice powder baby food extruder processing line Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Nutrition rice powder baby food extruder processing line Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Baby food machine

1.Big capacity nutritional powder making machine/baby food processing line:
Baby food machinery is used to produce infant baby food and some other instant flour products. The raw material is put in the mixer then mixed ingredients are fed into extruder feeder. The extruder is fitted with: special cylindrical holding silo; vibratory doser with hopper to feed the extruding screw; extrusion mechanism and cutting; independent electric panel.
After the extrusion the product is conveyed till the continuous rotary drier through a pneumatic conveyor. The continuous rotary drier has a heat exchanger with gas burner that allows a better heating of the product and it is economically viable owing the low cost of electric power. Case the client prefers we have the electric drier also.
2.Flow chart of baby food extruder processing line:
Mixing system---Extrusion system----Drying system----Grinding system.
3. Power: Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to users' Local power supply.
4. Raw materials for Baby food processing line:dopts cereals flour (corn, wheat, rice, oat, soy, etc).
5.The parameter of the baby food extruder processing line:

Model	SLG65	SLG70	SLG85
Install power	65kw	110kw	180kw
Consumption Power	55kw	80kw	130kw
Output	100-150kg/h	200-250kg/h	400-500kg/h
Dimension	19000x1300x2200M	22000x1300x2200M	30000x1300x2200M

6. Features of baby food extruder processing line:
a. Big capacity feeding hopper, variable frequency speed, two stages mixing wings, fast and efficient mixing and feeding.
b. DDC Double axis differential conditioner, available for steam, Pre-cooking and high efficient.
c. Linear slide face cutting system, strong power, variable frequency speed and large output.

7. nutrition powder Made By Our nutritive powder processing line:
Our nutritive powder processing line can make nutrition powder and Nutrition rice powder baby food extruder processing line shape like Dog, flower, stars, ball etc with various shapes and tastes through changing the dies and formulas
We have full formula of foods and will guide you to use different materials to produce variety quality food.

Name: high speed mixer

Dimension(m): 1.1×0.8×1.4
Motor Power: 4KW Speed: 400rpm
Throughput: 30kg per loading (5-6 minutes per loading)
Functions: Mix powder raw material with water
Features:
1. stainless steel material
2. new handle-opened design of discharge holes,no material leak
3.High speed can mix material better than other slow mixer.

Name: screw conveyor

Dimension(m): 3.2×0.6×0.7
Motor Power: 1.1KW
Screw speed: 300rpm
convey height range:1.5~2.5M
barrel diameter: Φ141mm
Function:
Power material can be conveyed in the stainless steel roller to the feed machine of extruder without leaking, dust and pollution; feed quantity is even and stable.
Features:stainless steel material.

Name: twin screw extruder

Dimension(m): 2.6×1.0×1.3
Total power: 37kw
Main Motor Power:22KW Feeder motor:0.75kw
Cutting motor: 1.5kw Heating power:12kw
Extruder diameter:Φ65 mm
Features:
Screw material is 38CrMoAl with nitriding treatment, the
hardness is 60HRC..
The barrel also use good material, hardness is 55HRC.
The gear box has forced lubrication system.
All motors can be adjusted the speed by Inverter.
The Extruder can change different molds to produce different Shapes product.

Name: multi-layer dryer

Dimension(m): 5.4×1.3×1.8
Heating Power:27kw Motor power:0.75kw
Belt speed:0.1-10M/minute Temperature: 20-200℃
Features:
The net belt running speed can be controlled by Inverter, to change the food drying time in the dryer.
Heating adopts the electric heat tube.
It has automatic temperature Control system.
The belt and the cover are all stainless steel.

Name: milling machine

Dimension(m): 1.1×0.6×0.5
Motor Power: 11KW
Functions:
Mill the puffed product into powder
Features:
Low energy-consumption, high efficiency.
Stainless Steel

Datong Company Info

Jinan Datong Machinery Co., Ltd is a professional food machinery manufacturer in Jinan city shandong province China.Our company congregates an exceptional food machine engineering team, personal customer service center and highquality manufacturing capabilities have evolved exponentially,We are working hard on explore constantly not only in the research of extrusion technology, but also in food technics to benefit our clients producing newfangled food in their markets. It making us become one of the preeminent providers of reliable extrusion equipment world-wide.

Datong Company Sale Manager：

Wechat：0086-15264102980

web: www.dotomachine.com

www.datongextruder.com

Tel/FAX: 0531-88085286

Mr.kevin Lee

Packing Details

Packing: Simple packing stretch film (Based on the customers' need adopt the wooden case or wooden pellets, etc.
Transportation: According to the contract, our company could in charge for the shipment or you prepaid. We will choose the most timely and safe way transportation.

Packing machine with woodcase and plastic flim

Loading container in our factory

FAQ

1) How can I place order?
A: You can contact us by email about your order details, or place order on line.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using.
3) What’s the order procedure?
A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 7-15days if we don’t have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4）How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
5）How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.

Contact Details