Nutritional Snack Food Cereal Bar Making Machine

Meanwhile Nutritional Snack Food Cereal Bar Making Machine particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Nutritional Snack Food Cereal Bar Making Machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Nutritional Snack Food Cereal Bar Making Machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Nutritional Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine Cereal Bar Making Machine

1. large air puffing machine

Technical parameters:

Electric pressure: 380V 50Hz Power: 0.75 kw

Production capacity: 50-60kg/h Weight :480kg:

Size: 1650*800*1350mm

Purpose:Used for the rice,corn,wheat,barley,beans and other food’s puffing

Characteristics:

1. Easy operation,power saved,save times and high production.

2.With seismic thermometer and equipment tank gauge,automatic measurement of the temperature and pressure within.

2. sugar boiled pot

Proposal:: we advice using two set boiled pots.

It can alternate use, improve efficiency.

(according to your requirement)

Device parameters

Volume:200L

Inside Diameter:840mm

Size:1470*905*990mm

3.Mixing machine

Device parameters

Power:1.1kw

Voltage:380V/50HZ

Size:800*900*1400mm

Capacity:20KG/once

Equipment Introduction

The material in the pot is teflon,it has advantages(1)Resist temperature(2) Corrosion Resisting (3) Non-adhesive(4) Not Deformation

Device parameters

Power:0.37kw

Voltage:380V/50HZ

Size:2500*820*1080mm

Equipment Material:

304 The surface is austenitic stainless

The conveyor belt material is PVC

Equipment Introduction

Conveyor the material to the automatic cutting machine

5.Automatic cutting and forming machine

Device parameters

Power:2.2kw

Voltage:380V/50HZ

Size:6000*1200*1200mm

Capacity:2-8t/8h

Equipment Introduction

Automatic laying material,pressing flat, cooling, cutting and forming

The conveyor belt speed can be adjusted

About the same width product,the length and thickness can adjust arbitrarily;

About the other width product,just change the knife shaft.

6. Cooling conveyor

Device parameters

Power:0.37kw

Voltage:380V/50HZ

Size:2500*820*720mm(according to your requirement)

7.package machine

voltage:220V

power:2.5kw

packing speed:50-300pcs/min

Packing length:50-300mm

Packing width:50-310mm

Packing height :5-60mm

size:3800*780*1500mm

Pls feel free to contact me for any question at all times.

Contact information:

Berry Xue (Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine)
Nutritional Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine Cereal Bar Making Machine Machinery Manufacturing Co.,Ltd
Mobile phone / WhatsApp / We chat: 18639525015 ;
T: Nutritional Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine Cereal Bar Making MachineNutritional Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine Cereal Bar Making Machine ; F: Nutritional Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine Cereal Bar Making MachineNutritional Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine Cereal Bar Making Machine

Address: Nutritional Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine Cereal Bar Making Machine Nutritional Nutritional Nutritional Snack Food Cereal Bar Making Machine Cereal Bar Making Machine Cereal Bar Making Machine Shangqiao, Yancheng, Luohe, Henan, China.