Floating and Sinking Aquarium Fish Feed Mill Processing Line Making Machine for sale

Meanwhile Floating and Sinking Aquarium fish feed Mill Processing Line Making Machine for sale particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Floating and Sinking Aquarium fish feed Mill Processing Line Making Machine for sale Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Floating and Sinking Aquarium fish feed Mill Processing Line Making Machine for sale Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Floating and sinking aquarium fish feed mill processing line making machine

1. Expanded fish feed

In order to meet modern fish farms development, most of modern fish feed is made by twin-screw (or single screw) extrusion production line, which is called expanded fish feed. Adopting cereals, vegetable proteins, vitamins, minerals, fish meal and fish oil as raw materials, and adopting dry-type or wet-type extrusion as manufacturing technique, expanded fish feed is made for both carnivorous and graminivorous fishes. Compared with traditional fish feed, expanded fish feed has the advantages: (1) easier feeding management (2) lower wastage rate (3) lower water contamination (4) higher feed nutritional ingredient use ratio (5) Floating and Sinking Aquarium fish feed Mill Processing Line Making Machine for sale storage time. Expanded fish feed improves digestibility and refined the balance of nutrients to match the needs of the different species of fish more precisely at different periods of development. At the same time, expanded fish feed improves the sustainability of the ingredients used. Based on the advantages, expanded fish feed will replace traditional fish feed in the future.

2. Expanded fish feed samples introduction

2.1 Raw materials: corn meal, wheat flour, rice flour, corn starch, de-oil soya flour, fish meat (or waste), fish meal, animal oil, ash content, wheat bran, allicin, gunk, vitamins, minerals, food color etc.

2.2 Humidity: the moisture is no more than 15%.

2.3 Ups and downs properties: floating, half-floating, sinking.

2.4 Shapes: spherical (pellets), granular, columnar, acetabuliform, pisciform, or customrized.

2.5 Sizes: (1) diameter: from 1.5mm to 15mm (2) length: user-defined.

3. Machines characteristic

3.1 This line can make fish feed, dog food, cat food by changing moulds, formula and cutting method.

3.2 This line extruder is twin-screw extruder, there is one couple of screws inside the barrel. The raw material of screws is 38CrMoAl. This material is treated by heat treatment and nitrizing treatment. Its hardness and strength performance is excellent, which can bear high temperature and high pressure. The screws are combined type. After the extrusion joints are wear and tear, don’t need to change whole set screws, only change extrusion joints.

3.3 This line extruder has self-clean function. The user don’t need to push out screws and clean them.

3.4 Our extruder and dryer are equipped with inverters. The inverters are famous brands. Our standard inverter is Delta, the user can choose LS, ABB, Floating and Sinking Aquarium fish feed Mill Processing Line Making Machine for sale, but different value.

3.5 This line automation degree is high, it need only 2-3 workers to operate.

3.6 The production factors can be quantized and controllable.

3.7 We can custom-make all the machineries for expanded pet food processing line as per users’ requirement. We supply OEM goods.

3.8 All the materials touching food is food grade.

3.9 This line extruder is equipped with forced lubrication system. Without running oil pump, main motor won’t run. It can protect gears, bearings and main motor.

4. Work flow: Raw material treatment---Extrusion---Drying---Flavoring---Packing & Detection

5. Twin-screw pet food extruders’ models and parameters (heated by electrical rings)

6. Packing and delivery

6.1 Inside package is plastic film, outside package is wooden/plywood cases, which is seaworthy.

6.2 We can supply fumigation package and certificate.

7. Service

7.1 We supply cost-benefit analysis for users.

7.2 We have professional service team, which serve users worldwide.

7.3 The warranty period is one year.

7.4 Our service is turn-key mode, which includes installment, debugging and train.

7.5 Supply quick-wear part and general tool.

7.6 Supply the basic formula of raw materials.

8. Company profile

Jinan Floating and Sinking Aquarium fish feed Mill Processing Line Making Machine for sale Machinery Co., Ltd. is Chinese Floating and Sinking Aquarium fish feed Mill Processing Line Making Machine for sale expanded food machinery manufacturer in China, which was established in 2009 and located in Jinan, China.

We can design and manufacturer the machines to make expanded for human and animals, such as puffed snacks, deep fried snacks, corn flakes, pet food, fish feed, textured soy protein, artificial rice, pasta, modified starch etc.

So far, we have 3 factories and 51 staffs, which covers 5000 square meters. We have ISO9001:2008 & CE certificate, and pass SGS, BV & TüV inspections. We have exported our machines to 55 countries in the world and keep development.

9. Company competitive advantages

9.1 Professional sales team, we can give users the most suitable solutions and suggestion.

9.2 Professional design team, we can design 2D & 3D drawings according to users’ actual situations.

9.3 Professional manufacture team, we can custom-made products according to users’ requirements.

9.4 Professional service team, we supply service all over the world.

9.5 Parts are coming from world & Chinese top quality suppliers.

9.6 Strict inspection and traceable process and management system.

10. Company honors

11. Who am I?

Q1: Are you manufacturer or trader?
A: We are manufacturer.

Q2: Could you supply customized machines?
A: We can supply customized machines based on your requirement. By the way, ODM & OEM are available for us.

Q3: Can you supply oversea service or food formula?
A: Our engineers can serve you in your factory, and we can supply formula.

Q4: Could I only order stand-alone machine (e.g. only extruder, dryer etc.)?
A: Yes. We can not only supply processing line, but also stand-alone machine.

Q5: Where are you? How can I get there?
A: We are in Jinan, which is in the North of China, 432km South to Beijing. You can go to Jinan by high speed train (Jinan West Station) or by air.

Q6: Have you ever sold your products to International market?
A: Until 2015, we have sold our products to 55 countries and regions. This number is keeping growing.

Q7: How can I get the after-service?
A: We will send you the spare parts by free if the problems caused by us. If it is the men-made problems, we also send the spare parts, but you should pay for it.

Q8: Could you supply food raw materials or the machine in different industry?
A: Because of the business scope limitation in China, we can only supply food machines. But we can help you to find the best suppliers in China. As Chinese, we are more familiar with Chinese market.

Need more details? Feel free to contact us!

Keywords: floating and sinking aquarium fish feed mill processing line making machine