Automatic fish feed processing line/ fish feed line/pet food machine

Meanwhile Automatic fish feed processing line/ fish feed line/pet food machine particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Automatic fish feed processing line/ fish feed line/pet food machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Automatic fish feed processing line/ fish feed line/pet food machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Automatic fish feed processing line / fish feed line/pet food machine

Fish food:

Diameter of the hole size in the mould for fish feed/food:

1.5mm to 14mm

Introduction:

1. fish feed processing line can produce dry fish food for trout, salmon, grass carp, herring, carp, Tilapia, gurnard, etc.

2. fish feed processing line can produce both Floating and Sinking fish feed with high content of protein. The fish can get abundant nutrient and then grow fast, healthy and no waste of the fish food in the fish farm(pond);

3. This line also can make dog food, cat food, wolf food, etc. Floating Fish Food Mac

4. We will provide various formulations after the order;Floating Fish Food Machine/Sinking Fish Food 5.Full free consult service forever.

Fisd Machinery/fish feed Machine fish feed Machinery/fish feed Machine

A Flow Chart: (For reference, we will allocate the whole plant based on your requirement)

Floating Fish Food Machine/Sinking Fish Food Machine

Mixer → Conveyor → Extruder → Air conveyor → Dryer → Hoister(Air conveyor) → Flavoring line→ Cooler.

Floating Fish Food Machine/Sinking Fish Food Machine

B. Technical Parameters of whole production lines:

Floating Fish Food Machine/Sinking Fish Food Machine

Floatable fish feed Machine/Floating fish feed Extruder

Features:

(1). The fish feed processing line has the advantage of rational design, high automatic degree and accuracy control.

(2).The main body material is stainless steel, which is easy to be cleaned.

(3).The screws material is 38CrMnAl, which is wear-resisting.

(4). Our project is turn-key. We will send our engineer to your factory, install and debug the equipments, and train your operators.

(5).The temperature and rotating speed can be controlled and adjusted.

Twin-screw extruder:

We always test the machine before packing.

Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers’ Local voltage according to different countries.

* Related machines's technical parameter will be supplied to customer.

* According to customer's factory size, factory layout can be provided in advance.

* According to customer's material cost, general formulation can be prepared well.

* Special machine can be supplied as customer's request.

* Professional Advice about Market, machines, processing , materials, packing can be supplied

* Suggesting professional ship agent or helping book ship as customer request.

Q1: If we buy machines, what is the after-sale service?

Jnsunbward Machinery Co. Ltd will send the engineer to buyer's factory. Offer

the trainee program, start the related food production as customer request.

Q2: If corn chips making machine wearable parts need to change, what should we do?

Jnsunbward Machinery Co. Ltd will offer the wearable parts all the time. And

offer the on-line video instruction for the operation.

Q3: What is the payment terms if we want to buy the corn chips making machine ?

Usually it is 30% by T/T, pay the balance by T/T before delivery or L/C at sight

Jinan Automatic fish feed processing line/ fish feed line/pet food machine Machinery Co., Ltd is an industry and trade integrated enterprise. The company is committed to R & D extrusion machinery and related ancilAutomatic fish feed processing line/ fish feed line/pet food machine equipments. It is covering mainly machinery and equipment for corn meal milling system, corn flakes/breakfast cereal system, baby food system, corn puff snacks system, pellets system, artificial rice system,soy nuggets system; as well as pet food/fish food system.

Our company:

Our partners

:

Contact information: