Fully Automatic Floating Fish feed machine/Extruder/Processing line/Equipment/pLant

Meanwhile Fully Automatic Floating fish feed machine/Extruder/Processing line/Equipment/pLant particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Fully Automatic Floating fish feed machine/Extruder/Processing line/Equipment/pLant Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Fully Automatic Floating fish feed machine/Extruder/Processing line/Equipment/pLant Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Floating Fish fodder machine/Processing line/Equipment/pLant

Floating fish feed machine's description

fish feed processing line can produce all kinds of fish fodder, such as ornamental fish fodder, edible fish fodder, floating fish fodder and sunken fish fodder. There are many customers using our fish fodder making machinery in south-east asia. Some customers use the processing machinery to produce some aquatic livestock fodder, namely, crab fodder, finless eel fodder, tortoise fodder, small-sized fish fodder, special fish food for goldfish, red parrot, dragon fish and seawater ornamental fish.

Advantage of fish feed machine:

1.The screws are made by ally steel and special craft, the screw life is Fully Automatic Floating fish feed machine/Extruder/Processing line/Equipment/pLant, uses building block system structure, may combine willfully;

2.The forced lubrication system, by guaranteed equipment transmission Fully Automatic Floating fish feed machine/Extruder/Processing line/Equipment/pLant life;

3.Visible auto-temperature controlling system, make the temperature-controlling to be more direct-viewing, parameter to be more precise.

4.The processing line is in reasonable design and with high automation;

5.pet food generally consists of meat, meat by products, cereal, grain, vitamins, and minerals. The product cost is very low and you can get high profit;

6. Our equipment enjoys favorable reputation in the world market, because the good quality and the reasonable price;

7.Materials: wheat/ corn flour, fish meal, born powder, animal oil, seawood meal,etc.

8. Final product: The final fish feed can be in different shape from 1.5mm to 12mm

9. Design: With flexible design based on the client's demands, we provide turn key project.

Specification of fish feed machine:

Flow chart of fish feed machine:

Equipment: Mixer→Screw conveyor→Twin-screw-Extruder→Air conveyor→Multi-layer Oven→Hoister→Spraying oil→Roller →cooling conveyor

Technical Parameters of fish feed machine:

Various shaped finished fish feed pellet:

Company Information:

Packing&Container

After-sale service of fish feed machine

engineers available to service machinary overseas

1. OEM & ODM

2. One year guarantee and life-time maintenance service.

3. Consultation service before, during, and after sales.

4. Project planning and design services.

5. Debugging of machines until all are functional.

6. Training the customers how to operate and maintain the machines correctly.

7. Offer new product techniques and recipes timely.

My Friend, about further information about our

pet food making machine, fish feed machine,fish food machine

please feel free to contact Amy directly:

Thanks for your kind attention!

Welcome to Saibainuo.You will have a different business feeling from here!!!