Small scale feed processing machines /animal feed production line/animal feed pellet making

Meanwhile Small scale feed processing machines /animal feed production line/animal feed pellet making particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Small scale feed processing machines /animal feed production line/animal feed pellet making Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Small scale feed processing machines /animal feed production line/animal feed pellet making Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Small scale feed processing machines /animal feed production line/animal feed pellet making

fish feed Production line Introduction

1.The whole fish feed production line including Crusher-Mixer-fish feed machine-Dryer-Cooler-Oil spray machine-Packing machine.

2.The line min.capacity is 30-40 kg/h,max.capacity is 3-4 t/h.

3.The whole line is proper for medium or large farm,factory.

4.The line can use to make floating or sinking fish feed,pet feed,chicken feed etc.

Small scale feed processing machines /animal feed production line/animal feed pellet making

Detailed Description of fish feed Production Line Machines

1.Crusher

The crusher machine is mainly used for grinding the raw materials like soybean,maize etc.

2.Mixer

The mixer machine is mainly be used to mix all kinds of raw material evenly, such as wheat meal, corn meal,sorghum meal,bone meal,meat meal and so on,it also can mix other micro- ingredients such as vitamins, amino acids, trace elements and other feed additives.

3.fish feed pellet machine

The machine is widely used for process all kinds of grains into high-grade aquatic floating feed pellet for fish,catfish,shrimps,crab.

4.Pellet dryer

The dryer can lower the temperature and moisture content of the feed pellet.

5.Pellet cooler

The cooler is adopting the counter-flow cooling principle,it can reduce the high temperature and moisture content,for large capacity fish feed production line,this is an necessary machine.For small capacity,the pellet can cool naturally.

6.Oil spray machine

The oil spray machine is use to spray oil onto the surface of the feed pellet.First the smell can attract the fish to eat the pellet.Second it is better for storage.

7.Packing machine

The packing machine can packing the finished feed pellet into bags,and 1-50kg per bag,thus it is more convenient for storage and transport.The process including filling,weighing,sealing.

Small scale feed processing machines /animal feed production line/animal feed pellet making

1. According to different purposes, you can choose aquatic particles and pets, animal particles.
2. According to different animals, as well as different stages of growth, you can choose different sizes, different types of particles.

Small scale feed processing machines /animal feed production line/animal feed pellet making

Henan Hanson factory established in 1984 in China, we are factory of fish feed extruder with 34 years of developing and manufacturing experience; Our main product covering Dry/Wet type fish feed production line, diesel engine fish feed extruder, corn/soyabean extrusion line, feather meal extrusion line, poultry feed production line, home use portable feed pellet mill.....

By now, we have had a lot plant well set in Russia, Bangladesh, Nigeria, Zimbabwe, South Africa, Ivory Coast....etc, Excellent quality and first-rate after sale service made us survive. Welcome your inquiries and visiting to our workshop at any time!

Small scale feed processing machines /animal feed production line/animal feed pellet making

1. RPE-SALES :

-- Work out professional proposal according to your project demand;Provide operation video help you learn about the machine performance.
-- Clarify your confusions in machine, raw material selecting, workshop foundation area. and our services.
-- Visitor reception : if you have plan to come visit our factory before the order.

2. AFTER - SALES:

-- Ensure promote delivery date;
-- Provide free charge wear parts along with the delivery for your replacement;
-- Design foundation planform according to your workshop aera help you complete the construction.
-- Offer each machine operation manual and the plant installation drawing.
-- Offer oversea installation, test running, staff training on site. SaSmall scale feed processing machines /animal feed production line/animal feed pellet making 100usd/day/person.
-- For small scale output, if you want install yourself, we will provide online instruction, and video instruction for complex problems.
-- One year guarantee except wear parts;
-- If buyer have any unsolved problems in the production, we can offer oversea maintenance , the round ticket charge and visa charge will be on buyer's account.

Small scale feed processing machines /animal feed production line/animal feed pellet making

Small scale feed processing machines /animal feed production line/animal feed pellet making

Packing: Export standard wooden case or Whole contaciner

Delivery time: Single machine: 7-10 days;

small production line: 25-30 days[capacity:500kg / h];

dium production line: 40-45 days[capacity: 1-1.5T / H];

large production line: 55-60 days[capacity: 2-3T / H];

Shipping:By sea

Small scale feed processing machines /animal feed production line/animal feed pellet making

Q1:What kind of raw materials should I use?
A1: A significant majority of protein should come from named aquatic animals( fish, salmon, herring, krill, brine shrimp. Plankton, squid) and plants (Spirulina, Kelp, spinach, Algae, Vegetable Extract) and not from protein add-ons and fillers such as soy, wheat, and corn products, which should (ideally) be limited to no more than 20% of the food.

Q2: What’s the difference between dry type extruder and wet type extruder?
A2: The difference is the wet type need a steam boiler while the dry type doesn’t. The dry type is cheaper than wet type, and the feed pellets made by wet type extruder is much smooth and with better quality.

Q3: How long does the floating fish pellet float on the water surface?
A3: The feed pellets made by our extruder can float on the water surface for over 24 hours. While the floating time can be adjusted when the pellets are extruded.

Q4: Does the fish pellet machine can only make feed pellets for fish?
A4: No. It’s not only can make high-grade aquatic feed pellets for fish, catfish, shrimps, crab etc., but also can make pellets for chicken,cat, dog, etc.

Q5: Do you supply the whole fish feed production line?
A5: Yes. We can supply a fish feed product line include crusher, mixer, fish feed pellet machine, feed pellet dryer, fish feed pellet cooler, oil spray machine and packing machine. The capacity is from 60-4000kg/h.

Q6: Is there a formula of making fish feed pellet?
A6: It totally based on the situation of your fish. We can offer free formula to our customers.