Easy to handle floating fish feed plant

Meanwhile Easy to handle floating fish feed plant particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Easy to handle floating fish feed plant Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Easy to handle floating fish feed plant Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Easy to handle floating fish feed plant

Overview:
It is specialized for production of high rank floating feed and pet food.

Raw materials: Corn, Brown rice, Paddy, Sorghum, Soybean etc.

For:Fish, shrimp, crab and pet etc.

Features:

1. Feeding System.
2. SKF Bearing
3. The cutter is with movable cutter base.
4. National patent and Reasonable price.
5. The output extruded pellets: beautiful with uniform size.
6. Passed ISO9001 and EU CE certification.
7. Extruded pellet size:1mm-5mm (optional)

fish feed extruder main structure show:

fish feed Extruder Details:

fish feed Extruder Technical Parameters:

The process for 5t/h floating fish feed extruder line in Egypt:

1. Egypt Customer signed the contract with Easy to handle floating fish feed plant of 5 t/h fish feed extruding line in January 10, 2016.
2. The entire project including material receiving,crushing,mixing,drying, extruding pellets, packaging etc.all process equipment and electrical Installation.
3. Egypt 5T/H fish feed extruding line is a turnkey project.
4. Easy to handle floating fish feed plant is responsible for all the equipment production, installation and commissioning, personnel training,and ultimately pay for the use and acceptance of Egypt.

1.Grinding process: By changing the crusher screen mesh, to get different grinding fineness of materials, to facilitate the needs of different growth stages of feed pellet production.

2.Batching and Mixing process: Various materials batching and enter into the mixer for fully mixing.

3.Extruding process: To use high quality double conditioner fish extruder to pressure the corn etc into pellets.

fish feed extruder pellets:

4.Cooling process: The temperature of pellets is about 60-80 degrees. For storage purpose, a cooler must be used to reduce their surface temperature and moisture content.

5. Packing Process:Packing process is to protect of the pellets becoming getting damp, and it is useful for transport and market sales.

6.Electric Control System: Control panel indicating processing flow; Can easily to fulfill automatic control of whole plant, such as start, stop and alarm as well as interlock function. We use Schneider electric components and soft starter, PLC control system.

Easy to handle floating fish feed plant Client From Egypt:

Easy to handle floating fish feed plant Feed line/Floating fish mill line projects:

Country and Project Lines

Lithuania 5T/H Animal Feed Pellet Line

Iran 4-5T/H Poultry feed line

Sri Lanka 5T/H Cattle Feed Production Line

Egypt 5T/H Floating fish feed Line

Sudan 10T/H Floating fish feed Line

Bangladesh 5T/H Animal Feed Pellet Line

Qatar 20T/H Poultry Feed line

Nigeria 15T/H Floating fish feed line

Nigeria 1T/H extrude fish feed line

USA 6-8T/H Animal feed line

Thailand 9-10T/H Grass Flour & Grain Pellet Line

Philippines 50T/H Poultry Feed Pellet line

Kenya 2-3T/H Poultry Feed line

Algeria 6T/H Poultry Feed Pellet line

South Africa 10T/H Animal Feed line

Mexico 1T/H Animal Feed Line

Panama 5-7T/H Chicken feed pellet line

Uruguay 15-20T/H Poultry and Animal feed line

Malawi 3-5T/H Cow Feed Production Line

Saudi Arabia 5-7T/H Poultry feed line

India 3-5T/H Feed Production Line

Bahrain 5T/H Animal Feed Pellet Line

Afghanistan 5-7T/H Feed Pellet Machine

Pakistan 3T/H Feed Pellet line

Libya 7-10T/H Poultry Feed Pellet line

Myanmar 2T/H Feed Line

Vietnam 10T/H floating fish feed line

Egypt 8-10T/H floating fish feed line

Canada 10T/H cow feed pellet line

Algeria 2-3T/H Chicken Feed Pellet line

Malaysia 30T/H animal feed line

Malaysia 15T/H floating fish feed line

About Easy to handle floating fish feed plant:

Jiangsu Easy to handle floating fish feed plant Machinery Co.,Ltd. was established in year 2003 with an occupation of 22,000 s.m, located in Jiangsu, China. Easy to handle floating fish feed plant is an excellent provider and operator for feed and biomass equipment. Easy to handle floating fish feed plant is specialized in the design, fabrication and installation of High-end Feed mill projects and wood biomass pellet projects which closely connected with the pellet mill, hammer mill, mixer, drum dryer, wood chipper, packing machine, feed mill, fish feed extruder, cooler, conveyors, bucket elevator etc. Easy to handle floating fish feed plant insist on “Quality is the soul of company", and passed the audit of ISO9001 quality system and all finished products meet the CE standard.

Under the principle of “High Quality, Competitive Price, Technical Innovation, Excellent Service”, Easy to handle floating fish feed plant has been in a Easy to handle floating fish feed plant position in the market, and she has won high reputation by global clients. Up till now, Easy to handle floating fish feed plant has already exported machine to more than fifty countries, such as: Canada, USA, Portugal, Greece, Russia, Latvia, France, Lithuania, Slovenia, Belgium, Hungary, Ukraine, Croatia, Romania, Turkey, Tunisia, Algeria, Malaysia, Vietnam, Korea, Thailand, Indonesia, Sri Lanka, Iran, Dubai, Australia, New Zealand and so on. Easy to handle floating fish feed plant promise that clients can get optimum benefit at minimum investment.

Easy to handle floating fish feed plant Service:

1. Make optimal design and layout according to clients raw material and capacity request.

2. Make booking for shipment from Easy to handle floating fish feed plant factory to clients factory.

3. Provide installation and debugging for clients.

4. Provide free training on-site for clients.

5. Provide English manual for whole line machines to clients.

6. Quarterly return visit to clients.

Easy to handle floating fish feed plant Advantages:

1. Inquiry could be replied within 2 hours.

2. Warranty period for max. five years.

3. Customized design based on clients request.
4. Independent R&D team and strict & scientific management system.

Packaging: Wooden box or Iron case or pallet, etc.

Shipping: FOB Shanghai, CNF, CIF clients port.

1.Q: How can I trust on your quality?

Answer:

1). All of the machine be tested successfully in Easy to handle floating fish feed plant workshop before shipment.

2). The working lifespan of Easy to handle floating fish feed plant machines is at least 20 working years.

3). Easy to handle floating fish feed plant wins 21 national patents for machines by our senior R&D engineers.

2. Q: What is your superiority comparing with other suppliers?

Answer:

1). Easy to handle floating fish feed plant can make optimal design based on your kinds of raw materials.

2). Easy to handle floating fish feed plant has overseas service center in USA, Germany, Italy, Malaysia, Tunisa etc, which can provide you spare parts very fast and on-site service quickly.

3). Easy to handle floating fish feed plant R&D ability is very strong, it can develop 8-10 new technology every year.

4). It has at least 90% traders and distributors place order for Easy to handle floating fish feed plant every year.

3. Q: Does your company provide Engineers Abroad Service?

Answer: Sure, we provide it. And we can provide free training for on-site workers.

4. Q: How to train our staff about operation and maintenance?

Answer : We will provide every detailed technical instructive, pictures, videos to teach them for the operation and maintenance. In addition, our engineers for guide assembly will teach your staff on site.

5. Q:What shipment terms you offer?

Answer: We can offer FOB, CIF, CFR etc based on your request.

6. Q:What payment terms you take?

Answer: T/T, LC at sight etc.

7. Where is your factory located? How can I visit there?

Answer: Our factory is located in Li yang City, Jiangsu Province, China, it is nearby Shanghai. You can fly to Shanghai airport or Nanjing Airport directly. We can ask our driver to pick you up at the airport or train station etc.

If you are interested, please send us an inquiry directly! It is our honor to make a best solution for you reference.