ISO Extruded Aqua fish shrimp floating fish food machine Processing line

Meanwhile ISO Extruded Aqua fish shrimp floating fish food machine Processing line particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
ISO Extruded Aqua fish shrimp floating fish food machine Processing line Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
ISO Extruded Aqua fish shrimp floating fish food machine Processing line Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Product DescriptionFish Steam extruder

Small Capacity steam fish food extruder：

1.fish feed machine can produce a premium quality special koi food, goldfish food, tropical fishes food, dog food, cat food, as well as laboratory dog and monkey food. They all are sold at home and abroad and win high praise and favorably commented from customers. This fish feed machinery can do floating and sinking fish feed. fish feed machine, pet food machine, fish feedstuff machine, fish food machine.
2.Raw Material:corn flour,wheat flour,low temperature,soya flakes meal,rice ,wheat bran,annexing agent,etc.

3.Voltage in China: Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers’ Local voltage according to different countries
4.Fish food machine Features:
1.Datong Company fish feed extruder machine is used to produce the food with novel shape, particular taste and color.
2. Scientific nutrition combination catches up the trend of the market.
3. In this line, you will see the advanced technology of JINAN DATONG machinery. With simple operation, accurate parameter control, the products can be finished in the stipulated temperature, pressure, humidity and time.
4. Owing to the reasonable design, special materials ,the stability, repairs can be guaranteed and ensured.
5.The various shape and taste must meet the different requirements.

5Fish food processing line Process chart:

Blender→elevator→Storage→Conditioner→Steam Fish food extruder→Air conveyer→Steam Dryer→Hoister→oil sprayer→Double Drum→Cooling conveyer→Sifter→Packing Machine.

Introduction of twin screw extruder:
1. Extruder is mainly composed of feeding, pre-conditioning, extrusion and cutting systems.
2. Main engine adopts inverter to adjust speed of screw according to changing of formula.
3. Wear sleeve and screw sleeve are made of high wear-resistant alloy steel, to reduce abrasion and prolong service life.
4. Twin screws adopt building block system (BBS) to be adjustable for different technology.
5. Double-shaft pre-conditioner makes excellent result of mixing and conditioning, increasing capacity of extruder 10-15%.
6. Diameter of feed φ1.2-φ12 can satisfy feed production for dog, cat, tortoise, bird, sea fish, shrimp and pet fish etc.

Extruder model:

Double screw fish food extruder:

1.Main motor power: 55.0kw Inverter speed controlling
2.Feeding power 1.5kw Inverter speed controlling
3.Cutting power 1.1kw Inverter speed controlling
4.Gear box oil lubrication pump: 0.37kw
5.Capacity 800-1000kg/h
6.Size : 5000*1150*2000
7.Conditioner: Manual Fill Knob,Automatic add water,feeding adopt frenquency sontrolling.
8.Screw diameter 95mm Machine weight: 3tons
9.Screw materials 38CroMnAl Barrel Steel 45#

pet food dryer(steam types)

Driving Motor：3kw（2 sets）.
Air circulate motor：27.5kw（5sets）.
exhaust fan ：2.2kw.
Heat Area：bigger than 400 square meters.
Steam press: more than 0.4mpa
Machine material：product touch net adopt stainless steel
Feed hopper parts adopt stainless steel
size：9000×1300×2200mm
Dryer surface adopt carbon steel
Functions:
This dryer can be used to bake and dry the food. It can bake all kinds of the inflating food,pet food, TVP/TSP food, peanut, nut, chew nut and so on.

Screw material:

Nitriding treatment(120 Hours)
Depth of Nitrided Layer: 0.5-0.8 mm
Hardness of Nitrided Layer: 950-1100Hv (HRC56°-65°)
Chrome Plating
Thickness of Hard Chrome Plating Layer: 0.05-0.10mm
Hardness of Hard Chrome Plating Layer: ≥950HV
Bimetallic Screw: Plasma Alloy Coating Spraying
Depth of Bimetallic Layer: >2mm
Hardness of Bimetallic Layer: HRC55°-68°
Bimetallic Barrel/Cylinder: Centrifugal Casting (Inlay Alloy)
Depth of Bimetallic Layer: >2mm
Hardness of Bimetallic Layer: HRC55°-68°

Cutting System:

1.The blades is made of alloy steel,Very sharp.

2.It can cut the product easily.

3.Hardness material an used long time.

4.it can fix more cutter according require.

Feet pellet packing machine:

Flowing Process:
Manual Bag placing→Automatic filling→Automatic weighing→ Automatic bag conveyer→Automatic bag sewing
Technical Parameter:
 Type：BZJ
 Weighting Range(kg)： 15~30kg
 Precisions： ±0.2%FS
 Output： 100 bags/hour
 Source(V/ Hz)： 380 , 50, 3Phase, as per your needs
 Air resource(Mpa)： 0.4～0.6
 Power(Kw): 2.2/3
 Mainbody Dimension:
 1400×700×2800mm, subject to the real machine.

Conveyer&Blender:

1.Blender Main motor: 7.5kw
2.Size: 3.0×1.5×2.5(m)
3.Output: 800-1000kg/h
4. Operate easily and safety.
5.Screw Conveyer main motor:1.1kw

6.Two sharft inside which can mix materia well
It used to mix the raw material before extruder.

Elevator

1.Output: 1000-1500kg/h
2. Main motor:2.2kw
3.Size: Depend on the hopper require.1500*800*5600
4. Convey the material from mixer to hopper.

Raw material hopper

1.Size: 1.7×1.5×4.8m
2.The bottom with screw feeder to feed the ingredients at set speed.
3.The speed is regulated by inverter.
4.This storage can store the raw material.It can make sure enough material for extruder.
5.It can store about 800-1000 one time.

Packing & Delivery Datong Service

1. Free consultation service before, during, and after sales;
2. Free Project planning and design services upon clients' special demands;
3. Debugging and inspecting of equipment until everything is functional before leaving the factory;
4. Overseas installation and training of equipment maintenance and operating personally;
5. Provide basic production techniques and formulas;
6. 1 year complete warranty for Extruded Food Wheat Corn Snack Pellet Making Machine.

Detailed Images Our Advantage Packing Details

Packing: Simple packing stretch film (Based on the customers' need adopt the wooden case or wooden pellets, etc.
Transportation: According to the contract, our company could in charge for the shipment or you prepaid. We will choose the most timely and safe way transportation.

Packing machine with woodcase and plastic flim

Loading container in our factory

Datong Company Info

Jinan Datong Machinery Co., Ltd is a professional food machinery manufacturer in Jinan city shandong province China.Our company congregates an exceptional food machine engineering team, personal customer service center and highquality manufacturing capabilities have evolved exponentially,We are working hard on explore constantly not only in the research of extrusion technology, but also in food technics to benefit our clients producing newfangled food in their markets. It making us become one of the preeminent providers of reliable extrusion equipment world-wide.

Datong Company Sale Manager：

Wechat：0086-15264102980

web: www.dotomachine.com

www.datongextruder.com

Tel/FAX: 0531-88085286

Mr.kevin Lee