Sinking Aquatic fish food Processing Line,Ornamental Fish feed making machine

Meanwhile Sinking Aquatic fish food Processing Line,Ornamental fish feed making machine particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Sinking Aquatic fish food Processing Line,Ornamental fish feed making machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Sinking Aquatic fish food Processing Line,Ornamental fish feed making machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Product Description

Sinking Aquatic fish food Processing Line：

Grain grinder system---Mixing system---Twin screw Extrusion system----Drying system----Flavoring system--Packing system

Sinking Aquatic fish food Processing Line

* Model: SLG70-W
* Type:Wet or Dry/Twin screw Extruder
* Capacity:100-10000kg/h
* Screws material: 38CrMoAl
* Barrel: 45 steel
* Bearing: SKF
* Protect plate: stainless steel

>>>>>Contact Us

1. fish feed making machine adopting international advanced technology, the pellets are very even.
2.we can adjust the cutter to get the different diameter and the length
3.The Electric heating device improve the food expansion rate.
4.High temperature and high pressure can kill the salmonellosis andbacterial infections.
5. floating fish feed making machine can get the higher-protein animal feed.
6.The product of floating fish food machine can floating in water about 12 hours.
7.The pellets no pollution and easy for working members to observe.
8. fish feed making machine novel design, unique, simple structure, easy to install and easy to operate.

Cutting system

fish feed dies

Screw &Barrel

SLG65 extruder >>>>KNOW MORE

SLG85 extruder >>>>KNOW MORE

SLG70Extruder >>>>KNOW MORE

>>>>>Contact Us

The oven has the compact structure, small occupying, large drying area, small surface area, slight radiating heat and high thermal efficiency.
* The running speed of belt net can be controlled (frequency).
* The temperature can be controlled willfully and designed according to the need.
* The belt and the heat preservation use the stainless steel; it is suitable for food industry.

Electricity oven

Gas oven

Steam oven >>>order now

1. What`s the raw material of the machine?
Datong: Our machine`s raw material usually suit for all kinds of powder.If your raw material is not power,We will give you the best suggest according to your selected material.
2. What`s the material of your machine?
Datong: We use all stainless steel for the parts directly with products.
3.What kind of fuels we can choose during our production?
Datong: You can choose gas,diesel,electricity as fuels,but pls tell me your idea to me when you ask for quotation.
4.How can I get more discount?
Datong: Please free to contact with Mr.Kevin lee Whatsapp/Cell:0086-15264102980

Jinan Datong Machinery Co., Ltd is a professional food machinery manufacturer in Jinan city shandong province China.Our company congregates an exceptional food machine engineering team, personal customer service center and highquality manufacturing capabilities have evolved exponentially,We are working hard on explore constantly not only in the research of extrusion technology, but also in food technics to benefit our clients producing newfangled food in their markets. It making us become one of the preeminent providers of reliable extrusion equipment world-wide.

a.) The seller will send one engineer to install the machinery.
b.) Buyer is responsible for finding a translator locally for easy understanding.
c.) The buyer will be asked to provide room, board, round-trip transportation,visa, and a nominal $50-$80 daily subsidy per person for their working days.
d.) Period of installation:The buyer should arrange at least 4 workers including one electric technician to help our engineer for installation. The raw material, workshop electric source should be well prepared before installation. On base of the above request, the installation period is7-15 days including training the operater. A possible delay of the installation period will be additionally invoiced.
e.) We will provide on-site service after 1 year. The customer will be asked to provide room, board, round-trip transportation, visa and a nominal $50 daily subsidy per person.

After machine inspection and when no problem, we will arrange the machine shipments to your country.