Commercial 13-25L R22 220v 50Hz 3 Flavor Soft ice cream machine

Meanwhile Commercial 13-25L R22 220v 50Hz 3 Flavor Soft ice cream machine particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Commercial 13-25L R22 220v 50Hz 3 Flavor Soft ice cream machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Commercial 13-25L R22 220v 50Hz 3 Flavor Soft ice cream machine Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Commercial 13-25L R22 220v 50Hz 3 Flavor Soft ice cream machine

Specification:

MQ-L22A

Product size :540*720*850mm

Power supply :220V,50/60HZ

Power:1.95KW

Production Quantity :22-25L/hour

Hopper :4L

Refrigerant:R22 /R404A

Flavor :2+1 flavo

About spare parts of tabletop three flavor ice cream machine(maker) MQ-L22A
1. Compressor: BOYARD compressor, famous for its high efficiency, low temp, and commercial used in ice cream machine
2. Beater: high force beater motor
3. Others : Top micro computerized controlling board, edible standard silica gel seals

.

About design of tabletop three flavor ice cream machine (maker) MQ-L22A
1. Multi patents: one outlook design patent, three pragmatic patents ,one invention patent
2. Low noise: running noise much lower than other brands
3. Low voltage and high currency protection system
4. Customized panel design to make its operation similar to house appliance
5. With durable color coated board
.

About functions of tabletop three flavor ice cream machine (maker) MQ-L22A
1. self cleaning system
2. high and low voltage alerting
3. low power consumption
4. cone counting system
5. cone &temp display
6. low mix and standby function
7. sixteen shift for hardness and softness alteration
8. numerical speed control, formation ratio indicating and formation animation display
9. problems alert system, low mix alert, belt skid alert, refrigeration trouble alert, switch trouble alert, high temp alert
.
About optional functions:
1) air pump
2) rainbow system
3) cone holder
4) LED screen
5)Aspera compressor
.
After sales and warranty:
1. normally we prepare 1% total value spare parts together with each order
2. if customers can bring back and send to us the broken parts which used less than one year. We will exchange the new parts and send to buyers.
3. whenever the guidance help needed ,Goshen people will fulfill its power to make it and corresponded training works are available in factory .
4. once you met trouble ,better tell the responded sales with evidence …We advise with pics which can back you up strongly. We can prepare spare parts in your next order repetitively. If urgently needed, courier charge beard by buyer.

.

About function:

• Self cleaning system
• Higher and lower voltage alerting
• Low power consumption
• Cone counting function
• Cone counting display
• Low mix and temp display
• Rainbow system
• Precooling system
• Expansion function

Picture for Commercial 13-25L R22 220v 50Hz 3 Flavor Soft ice cream machine

Wooden Case Packing accord with export standard. After inspection by the quality control department, passing inspection, the machine comprehensive clean-up, and then start packing. First desiccant is placed in the machine And then around the machine with 6 cm thick foam board, winding stretch film for reinforcement, and then add the bubble film. Machine packed in wooden case, and then the metal strip reinforcement. Product packed in containers, depending on the product to be reinforced.

we are sure to supply overseas installation. Generally, whole production line installation will need about 7 days. And the customer should charge for the visa,the air tickets,the accommodation and the saCommercial 13-25L R22 220v 50Hz 3 Flavor Soft ice cream machine.

About our product warranty time:24 months free of charge.

Shijiazhuang Daina Machinery Co.,Ltd specially produce bakery machine for 20 years,we

specialize in supplying a wide range of Bakery equipments.We dedicate to cooperating with bread

manufacturers and provide with various services such as design consultation,equipment

supplying,technician installation and outstanding after sales service.

Our main products are baking ovens(rotary ovens,convection ovens,deck ovens,pizza ovens,

tunnel ovens,pizza conveyor ovens),dough spiral mixers,proofer rooms,planetary mixers,dough

dividers and bread moulders,ice cream machine,ice cream roller machine and production line which all applied ISO9001 and

CE certificates.

Daina Machinery company has a strong technical team.We keep in step with technologies of

internationally advanced food machinery.We have best quality and best after-sales service. We never only sell machines. We help customers use our machines to

produce best products.

With our fully experienced senior management team,we provide our customers with

professional and satisfying service.

Daina! Your best choice!

Welcome to visit our website!

1. What is the MOQ of the bakery machinery?

1 set.

2. what is the grantee period?

The ordinary type is 12 months, and the luxury type is 24 months, and if any components damaged

in grantee period, we will send same free components by air and will guide for installation.

3. Do you supply overseas installation? How many days you need?And what about the charge?

Yes, we are sure to supply overseas installation. Generally, whole production line installation will

need about 7 days. And the customer should charge for the visa, the air tickets, the

accommodation and the saCommercial 13-25L R22 220v 50Hz 3 Flavor Soft ice cream machine.

4. What about the packing?

After finishing the production, we will clean and packed it before it is qualified by the QC manager.

First we will put drying desiccant inside the machine (protect the machine from wet damage

during the transportation), then put 6mm cystosepiment outside it and upgrade the thermal

contracting film.

Finally we will put wooden case and steel belt. We will upgrade again according to different

machine to protect the damage of the machine before loading the container.