Flavored sunflower seeds frying machine/stainless steel food machinery

Meanwhile Flavored sunflower seeds frying machine/stainless steel food machinery particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
Flavored sunflower seeds frying machine/stainless steel food machinery Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Flavored sunflower seeds frying machine/stainless steel food machinery Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Flavored sunflower seeds frying machine/stainless steel food machinery

Sunflower seed cleaning machine

The machine is special for sunflower seed’s cleaning.

It’s good on reasonable structure, easy operation.

Solve the shortcoming of manual work’s hard operation, waste time and energy.

Pot

The pot can be used in boil the Sunflower Seeds , Groundnut etc.

The gas heating negative pressure pot can be used in making different taste sunflowers seed.

Saving boiled time, good flavored.

Save the cost .

Two layers drying machine

From the sixth generation updated to the seventh generation.

1. The drying machine from the standard configuration change to customized by the PRO system. The material, thickness, structure of drying machine all can customized.

2. Optimize the turning machine’s structure and angle, made the wind pressure evenly, product quality unification.

3. The drying machine’s insulating layer’s thickness from 30mm increase to 50mm, lower the heat loss.

4. Sunflower seed special machine change to electric out feed, avoid splashing when the tail product out feed at last.

5. Provide low-level configuration the seventh generation two layers drying machine.

Shandong Nongguo Machinery Co., ltd (Linyi Feilong Food Machinery Co.,Ltd ) have 10 years experiences to producing peanut making machine .Relying on the actual production to make the development of the equipment . We can supply the whole line to roasting the peanut which use the gas as fuel ,workshop air purification system , sewage treatment system etc. We can make the equipment by your requirements , and supply the planning and design of new factory, remould of old factory .

We know equipment problems in the process of operation , and in the most appropriate way to remould it . Our production machinery and equipment is unparalleled in terms of practicality , can use in your process to bring you the biggest convenience .