small scale corn flakes production plant

Meanwhile small scale corn flakes production plant particles adjacent the screw will rotate along with screw's rotating, causing every particle adjacent the screw will rotate along with screw's rotating, causing every particles insides the chamber to posses different speed. Therefore, relative movement among particles creates heat which is necessary during manufacturing because of helping protein change properly, damage cold oil ,decrease plasticity, decrease oil, elasticity, resulting in high oil productivity.

The all-wet process uses raw coconut rather than dried copra, and the protein in the coconut creates an emulsion of oil and water.The more problematic step is breaking up the emulsion to recover the oil. This used to be done by prolonged boiling, but this produces a discolored oil and is not economical. Modern techniques use centrifuges and pre-treatments including cold, heat, acids, salts, enzymes, electrolysis, shock waves, steam distillation, or some combination. Despite numerous variations and technologies, wet processing is less viable than dry processing due to a 10-15% lower yield.
Proper harvesting of the coconut makes a significant difference in the efficacy of the oil-making process. Copra made from immature nuts is more difficult to work with and produces an inferior product with lower yields.
small scale corn flakes production plant Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
small scale corn flakes production plant Conventional coconut oil processors use hexane as a solvent to extract up to 10% more oil than produced with just rotary mills and expellers. They then refine the oil to remove certain free fatty acids to reduce susceptibility to rancidification. Other processes to increase shelf life include using copra with a moisture content below 6%, keeping the moisture content of the oil below 0.2%, heating the oil to 130-150 °C (266-302 °F) and adding salt or citric acid.
Jinan Joysun Machinery Co., Ltd. provide hydraulic oil expeller and scew oil press machine to extract the coconut oil forits customers. Big production capacity, automatic lifting, pressing and filtering are features of screw oil press machine, also a coconut oil production line is available too. Contatc us for detail.

Products Description

Professional production, quality assurance, affordable, welcome to inquire,
100% factory direct sales, look forward to building cooperate with you wholeheartedly!

Video Links On small scale corn flakes production plant:https://www.small scale corn flakes production plant.com/watch?v=O-vbesnm_74&t=5s

Small scale corn flakes production plant is a kind of crispy food which is processed by twin- screw extruder and takes grist as basic material. The majority are fiber flimsy, and either too sugary or too salty. Double screw corn flakes machine extruder line can be directly extruded from the extruder, dryer and seasoner, we can produce all kinds of snacks and different shapes by adjusting
the dies from extruder.Variety shapes are available for ball, tube, stick, ring, fruit loop, star, wheel and flower and heart
shape by adjusting the mould in the extruder.
Raw Material : Corn Grits (Powder), wheat flour, rice flour, oat meal, other grain meals.

Modle:ZH65 Twin-screw Extruder

Capacity: 120-150kg/h.

Modle:ZH70 Twin-screw Extruder

Capacity: 200-250kg/h.

.

Modle:ZH85 Twin-screw Extruder

Capacity: 300-500kg/h.

.

Advantages

1. We specialize in high capacity extruder which can reach 4000kg/h

2. The screw material: Alloy steel (38CrMoAL) by nitriding process. High strength and wear-resting.

With good self-cleaning ability, it’s unnecessary to remove the barrel and screws for cleaning.

3. SIMENS (China) Motor

4. It adopts speed-adjusted converter on feeding system, extrusion system and cutting system. Food grade stainless steel twin screw feeding device guarantees stable materials feeding in the whole food process.

5. Adopted the Delta inverters, ensure the extruder better running.

6. The gearbox has automatic lubrication function, which prolong service life of gears.

7. Cutting knife is fixed in the die head seat, rotary cutting driven by V-belt

Our Company

Assembly Workshop

Our Workshop

Showing Workshop

Show finished machines

Office

Our office

Team

Our Team

Meeting Room

Meeting with customers.

Sample Room

Showing products produced by our machine.Certifications FAQ

Q1. Are you a manufacturer or a trading company?

A: We are a professional manufacturer of food & feed extrusion machine.

We have own factory and R&D department. SGS has certified our company on site.

Q2. What is your payment terms?

A: Strongly recommend to use small scale corn flakes production plant’s Trade Assurance.

T/T :30% prepayment,70% before delivery. L/C at sight is available.

Other payment is negotiable

Q3.Do you offer guarantee for the products?

A: Yes, we offer 1-2 years warranty to our products.

Q4. What about the lead time?

A: Regular products:20-30 working days

Customizable products:30-40 working days.

Q5. Can you provide food or feed formula ?

A: We can provide basic formula for produce the food etc.

And help customer to produce new products according to customer’s formula.

Q6. What after-services do you provide?

A: Send engineers for installation, trial running and training workers at customer's site.

Handling the problems occurred during use. Supply spare and wearing parts on discount.
Help customers to solve any other problems .
Packing & Delivery

Packing: Outer Packing---Wooden case

Inner Packing----Wrapped with plastic film.

Delivery : 20-40 working days

1. Fixing the machine2.Wrapping machine with Plastic film3. Wooden case Packing 4. Painting Logo5. Loading6. Ready for Shipping